Band Saw Operation 211

alloy steel

A steel that contains intentionally added materials that change the property of the metal. Common alloy elements include manganese, molybdenum, and nickel.

alternate tooth set

A tooth set that has an alternating, left-right sequence. Alternate tooth sets provide high cutting efficiency but poor surface finish.

back

The straight portion of a band saw blade that is opposite the tooth edge. The back, or backing, is the saw blade component that does not contain the teeth.

backing

The straight portion of a band saw blade that is opposite the tooth edge. The backing, or back, is the saw blade component that does not contain the teeth.

band saws

A saw that uses a saw blade constructed from a continuous loop or band of metal. The band saw blade is looped around two or more wheels.

band strength

The blade's ability to resist deflection and resistance. Band strength, which is also known as beam strength, is dependent on the blade's width and thickness.

beam strength

The blade's ability to resist deflection and resistance. Beam strength, which is also known as band strength, is dependent on the blade's width and thickness.

bi-metal blades

A band saw blade made from two pieces of alloy steel that are welded together. Bi-metal blades have a flexible back but hard teeth.

blade guides

A device, often part of a set, used to keep a band saw blade moving on a specific track or path. Blade guides increase the precision of band saw cuts.

carbide blades

A band saw blade that has a steel back and very hard carbide tooth tips. Carbide blades are created by welding carbide to the saw teeth and then grinding them into shape.

carbon steel blades

A band saw blade made out of a single piece of steel. Carbon steel blades are generally the least expensive.

cast aluminum

Aluminum that is poured as a liquid into a mold and cooled into a solid shape. Cast aluminum is easily machined.

chip

An unwanted piece of metal that is removed from a workpiece. Chips are formed when a tool cuts or grinds metal.

circular sawing

The use of a round saw blade with teeth around its perimeter. Circular sawing rotates the blade at high speeds to cut through metal.

compression

A pushing or pressing force that is directed toward the center of an object and attempts to squeeze it. Compression can cause a band saw blade to curve or arc.

contouring band saws

A type of band saw equipped with a table that can tilt to cut irregular shapes. Contouring band saws can cut a wider variety of shapes than traditional band saws.

cut-off operations

A shearing process that performs a single cut in order to separate a piece of metal from the original stock. Each cut in a cut-off operation separates a new part.

discontinuous chips

A chip that easily fractures from the workpiece into small, separate pieces. Brittle metals tend to create discontinuous chips.

drive wheel

The component of a band saw's pulley-like drive system that actively turns to propel the blade forward. The drive wheel power's the blade's movement.

feed

The rate at which the saw blade moves into the material as it cuts. The feed of a cut has an inverse relationship with the speed of the cut.

feed rates

The rate at which the saw blade moves into the material as it cuts. Feed rates often involve linear movement from one point to another and are measured in inches per minute.

friction blades

A saw blade made with one piece of carbon steel. Friction blades are used at high speeds to soften metal for removal.

gage

The side-to-side thickness of a band saw blade. Blade gage contributes to the width of the saw's cut.

gullet

The curved area between two saw teeth into which the chip curls. Gullet shape depends on the saw blade teeth.

gullet capacity

A measurement of the largest chip that can curl in the gullet area before the chip becomes deformed. Gullet capacity affects cut quality and blade life.

gullet depth

The distance from the tooth tip to the bottom of the gullet. Gullet depth is a component of tooth shape and gullet capacity.

hacksawing

The use of a long blade mounted in a bow-shaped frame. Hacksawing takes place using a reciprocating, or back-and-forth, motion.

hard-edge, flexible-back blades

A saw blade made with one piece of carbon steel with a heat-treated tooth edge. Hard-edge, flexible-back blades are a type of carbon steel blade.

hard-edge, hard-back blades

A saw blade made with one piece of heat-treated carbon steel. Hard-edge, flexible-back blades are a type of carbon steel blade.

hardness

A material's ability to resist penetration, indentation, or scratching. Hardness is a necessary property of cutting tools.

hardness

The ability of a material to resist scratching, indentation, or penetration. Workpiece materials with increased hardness generate more heat and are more difficult to machine.

high-speed steel

HSS. A common cutting tool material that is relatively inexpensive and offers excellent toughness. High-speed steel is used for the teeth of bi-metal saw blades.

hook tooth form

A tooth form that has evenly spaced teeth, wide gullets, and a positive rake angle.

idler wheel

The unpowered component of a band saw's pulley-like system that turns the blade. The idler wheel's primary purpose is to guide the blade.

kerf

The slot made by a band saw as it cuts. Kerf also refers to the width or dimensions of that slot.

machinability

The ability of a metal to be cut and shaped by machine processes such as cutting, grinding, turning, or drilling. Machinability indicates the relative ease with which a metal can be machined.

pinch back

An unwanted effect that occurs when the slot being cut by a saw blade closes over the blade. Pinch back can be prevented by widening the cut.

radius cuts

A curved or contoured cut. Radius cut size can be limited by the blade-width.

raker tooth set

A tooth set that has a uniform set angle and a three tooth set sequence of left, right, and straight. Raker tooth sets balance cutting efficiency and surface finish.

sawing

A basic, chip-producing cutting process that uses a blade set with a series of teeth on its edge to cut a narrow opening in a workpiece. Sawing may be used to produce slots or grooves or to separate the workpiece into two pieces.

set

The degree to which band saw teeth are bent out to the side. Tooth set is used to widen the cut and prevent pinching of the saw blade.

shear plane angle

The angle at which the work material shears off. Shear plane angle largely determines chip type and thickness.

shears

To cut off sheet or bar metal between two blades. In sawing, shearing a material creates long, curling, continuous chips.

skip positive tooth form

A tooth form that has evenly spaced teeth, wide gullets, and a positive rake angle.

skip tooth form

A tooth form that has evenly spaced teeth, wide gullets, and a zero-degree rake angle.

speed

The rate at which the blade cuts across the face of the material. The speed with which a material can be cut is affected by the material's hardness.

spring steel alloy

A type of alloy steel that has both hardness and yield strength. Spring steel alloys are used in bi-metal saw blades.

standard tooth form

A tooth form that has evenly spaced teeth, deep gullets, and a zero-degree rake angle.

steel

A metal consisting of iron and up to 2.11% carbon, usually with small amounts of trace elements. Steel is the most common metal in manufacturing.

stock

Raw material that is used to make manufactured parts. Stock is available in shapes such as bars, plates, or sheets.

teeth per inch

tpi. The amount of teeth or portions of band saw teeth that are found in an inch. Teeth per inch is the English equivalent of teeth per millimenter, and it is an important variable in saw blade selection.

teeth per millimeter

tpm. The amount of teeth or portions of band saw teeth that are found in a millimeter. Teeth per millimeter is the metric equivalent of teeth per inch, and it is an important variable in saw blade selection.

tip

The point of the saw blade tooth that digs in and cuts into the workpiece. Tips perform the cutting action.

titanium

A silver-gray, strong, but lightweight nonferrous metal. Titanium has a high strength-to-weight ratio, excellent flexibility, and exceptional corrosion resistance.

tooth back

The rear side of a saw blade tooth facing away from the direction of the cut. The tooth back helps to form the gullet.

tooth back clearance angle

The angle that measures the amount of space, or clearance, between the tooth back and the workpiece. The tooth back clearance angle is formed between the tooth back and the workpiece surface.

tooth face

The front side of a saw blade tooth, facing toward the direction of the cut. The tooth face is the surface onto which chips flow during the cut.

tooth form

The shape, spacing, and geometry of a saw tooth. Tooth forms occur in repeating patterns.

tooth forms

The shape, spacing, and geometry of a saw tooth. Tooth forms occur in repeating patterns.

tooth pitch

The space between the band saw teeth as measured from tooth tip to tooth tip. Tooth pitch is an important variable in saw blade selection.

tooth rake angle

The angle formed by the tooth face and a line perpendicular to the back of the blade. Tooth rake angles measure the angle of the tooth face.

tooth set

The bending of band saw teeth outward to the side. Tooth set is used to widen the cut and prevent pinching of the saw blade.

tooth sets

The bending of band saw teeth outward to the side. Tooth set is used to widen the cut and prevent pinching of the saw blade.

tungsten carbide

A compound of tungsten and carbon. Tungsten carbide offers excellent hardness and wear resistance.

variable positive tooth form

A tooth form that has irregular tooth spacing, varying gullet depth, and a positive rake angle.

variable tooth form

A tooth form that has irregular tooth spacing, standard tooth forms, varying gullet depth, and a zero-degree rake angle.

wavy tooth set

A tooth set that has groups of teeth arranged on one side and then the other. Wavy tooth sets can handle the strain of interrupted cuts.

width

The measurement from the tip of a band saw blade tooth to the back of the blade. Blade width includes the blade teeth and back.

workholding device

A device used to support, locate, and hold a workpiece for manufacturing purposes. The workholding device establishes a relationship between the cutting tool and the workpiece.