Inspection

Blueprint Reading 131

The class Blueprint Reading provides a thorough understanding of blueprints and how to read them. Blueprints are documents that contain three major elements: the drawing, dimensions, and notes. The drawing illustrates the views of the part necessary to show its features. Together, the extension and dimension lines on the drawing indicate dimensions and specific tolerance information of each feature. The notes contain administrative and global information about the part. A blueprint contains all instructions and requirements necessary to manufacture and inspect a part.

An understanding of how to read a blueprint is critical to manufacture and inspect parts to accurate specifications. Accurate blueprint creation helps to ensure that finished parts will function in a way that meets the original intent. After taking this class, users should be able to read a basic blueprint and determine the critical features on a part that need to be measured.

  • Difficulty Beginner

  • Format Online

  • Number of Lessons 17

  • Language English

TO GET STARTED SPEAK WITH A SPECIALIST AT 1.866.706.8665

Or fill out this form and a specialist will contact you shortly

Course Outline
  • Blueprints
  • Orthographic Views
  • Auxiliary Views and Section Views
  • Types of Section Views
  • Section View Types Review
  • Object Lines and Hidden Lines
  • Center Lines
  • Dimension Lines and Extension Lines
  • Phantom Lines, Leader Lines, and Break Lines
  • Cutting Plane Lines and Section Lines
  • Line Types Review
  • Blueprint Dimensions
  • Types of Dimensions
  • Tolerances
  • Notes: Title Blocks and Change Blocks
  • Notes: Scale and Tolerance
  • Final Review
Objectives
  • Describe blueprints.
  • Describe orthographic views.
  • Distinguish between auxiliary views and section views.
  • Distinguish between types of section views.
  • Distinguish between object lines and hidden lines.
  • Describe center lines.
  • Distinguish between dimension lines and extension lines.
  • Describe phantom lines, leader lines, and break lines.
  • Describe cutting plane lines and section lines.
  • Describe blueprint dimensions.
  • Distinguish between types of dimensions.
  • Describe tolerances.
  • Describe the title block and change block.
  • Explain scale and tolerance information in the notes section.
Glossary
vocabulary term
Definition

American Society of Mechanical Engineers

ASME. An organization that publishes technical materials and sets industrial and manufacturing standards. Along with International Organization for Standardization, ASME provides written standardization for blueprints.

arc

A curved feature representing a portion of a circle. Arcs represent a curve or portion of the circumference of a circle.

auxiliary view

A blueprint view drawn at a right angle to an angled feature of a part. Auxiliary views provide a full straight-on picture of an angled side that cannot be fully represented with a basic orthographic view.

blueprint

A document that contains all the instructions for a particular part and communicates all requirements necessary to manufacture and inspect a quality part. There are three elements: the views, their dimensions, notes.

break line

A line used to define the boundary of an imaginary broken-out section or to shorten dimensions that are excessively long. Break lines are wavy and irregular.

broken-out section view

A section view that removes a small portion of the part exterior to reveal the features beneath. Broken-out section views are used to highlight small details.

center line

A line used to define the midpoint of a cylindrical or symmetrical feature or part. Center lines consist of alternating long and short dashes.

change block

The area of the blueprint indicating any changes or revisions made to the part views or dimensions. Change blocks should contain every revision, as well as the dates in which those revisions were made.

crosshatch

Sets of parallel lines that intersect to form a pattern. Cross hatch patterns are often used in blueprint design.

cutting plane line

A line in a blueprint that represents the path and position of an imaginary cut made to form a sectional view. Cutting planes are made up of a long dash, followed by two short dashes that are slightly thicker than a phantom line.

deburring

Removing sharp projections left on a workpiece after a machining or grinding operation. Deburring is often done by hand or by robot using coated abrasives.

decimals

A number representing a portion of a whole. Decimals are indicated by values to the right of a decimal point.

dimension line

A line used to define the measurement of a part feature. Dimension lines consist of a solid line with arrows at both ends.

dimensioning

The process of determining the desired measurement of a feature on a part. The ideal dimensions for a part can never be met, requiring the addition of tolerances.

dimensions

The desired measurement of a feature on a part. A dimension is listed as a unit.

drawings

A document that contains detailed instructions to make a part. Drawings, or prints, contain dimensions, directions, and details to guide employees in metal cutting operations to machine a part and its features.

extension lines

A line used to visually connect the ends of a dimension line to the relevant feature on a part. Extension lines are solid and drawn perpendicular to the dimension line.

first-angle projection

The European standard for engineering drawings. In first-angle projection, the top view is under the front view.

fractions

A numerical expression representing a part of a larger whole. Fractions appear as one number over the other with a horizontal line or slash between them.

full section view

A section view in which the part is cut entirely in half. On full section views, the right side is removed and the left side is shown cut-side up.

functionally complex

Able to correctly and efficiently perform a specific task. The functional complexity of blueprint drawings allows for the creation of parts that can perform tasks immediately after being built.

geometric dimensioning and tolerancing

GD&T. An international standard for communicating instructions about the design and manufacturing of parts. Geometric dimensioning & tolerancing uses universal symbols and emphasizes the function of the part.

half section view

A section view in which one quarter of a part is shown. Half section views are often used for symmetrical parts.

head depth

The measurement of the flat top of a fastener from top to bottom. Head depth is an important measurement in determining the dimensions of a T-slot.

head width

The measurement of the distance across the flat top of a fastener. Head width is an important measurement in determining the dimensions of a T-slot.

hidden line

A line used to define a part feature that is not visible in a specific view. Hidden lines consist of a series of short dashes.

inspection

The examination of a part during or after its creation to confirm that it adheres to specifications. During inspection, defects may be identified and corrected.

International Organization for Standardization

ISO. An organization that establishes documented standards, rules, and guidelines to ensure that products, processes, and services are fit for their purpose. Along with American Society of Mechanical Engineers, ISO provides written standardization for blueprints.

leader line

A thin line ending in an arrow or dot used to indicate a part feature. Leader lines may be used when there are space limitations in a view.

notes

An additional instruction or general comment added to a blueprint. Notes contain information about the material, finish, tooling, tolerances, and other miscellaneous information.

object line

A line used to define the shape and size of a part feature and represent the visible edges of the part. Object lines are solid.

oblique

At a slanted angle. Oblique angles are not parallel or perpendicular to a surface or line.

offset section view

A section view resulting from an imagined cut that does not follow a straight line. Offset section views are used to include features that do not reside on a straight line.

orthographic view

A drawing often used for blueprints that communicates the shape and size of an object in two dimensions. Orthographic views present all the design elements of a part through a series of illustrations, each showing one of its necessary sides from a continuous perspective.

parallel

Running equidistant from each other at all points. Parallel means never intersecting.

perpendicular

Forming a 90° angle with another plane or object. Perpendicular lines form corners like those found on a piece of paper.

phantom lines

A line that indicates the alternate positions of a movable feature, repeated details, or material that will be removed during a stage of the manufacturing process. A phantom line consists of alternating long dashes with two short dashes in between.

prints

The examination of a part during or after its creation to confirm that it adheres to specifications. Inspection allows manufacturers to identify and correct product defects.

ratio

A numerical expression representing a part of a larger whole or proportion. A ratio consists of two numbers separated by a colon.

reference dimensions

A dimension that is provided for informational purposes only. Reference dimensions appear in parentheses or are marked with REF.

removed section view

A section view resulting from an imagined cut that removes and rotates a slice taken from the middle of a part feature. Removed section views are sometimes used to show an enlarged area of a part too small to be illustrated clearly on the original view.

revolved section view

A section view resulting from an imagined cut that separates the middle of the part feature and rotates a slice taken from that cut in place. Revolved sections have section lines and show the true shape of a part.

scale

The relationship between the size of the drawing on the print and the actual finished part size. The scale for a part drawing is usually listed in the title block.

section line

A line used to identify the imaginary cut portion of a part in a section view. Section lines appear as a series of diagonal lines drawn close together at a 45-degree angle.

section view

A view illustrating a rotated section resulting from an imaginary cut in the part. Blueprints may contain a variety of different section views.

sum

The total amount resulting from adding two or more numbers together. Sums are useful when showing the total of other dimensions given on a print.

surface finishes

The degree of smoothness of a part's exterior after manufacturing. Surface-finish quality will usually be specified on a manufacturing print.

third-angle projection

The American standard for engineering drawings. In third-angle projection, the front view is under the top view.

three-dimensional

Having or appearing to have length, breadth, and depth. Three-dimensional drawings show an object's shape better than flat drawings.

throat depth

The measurement determined by the thickness of a material and the dimensions allowable for simple machines like a T-slot bolt. Throat depth is an important measurement in determining the dimensions of a T-slot.

throat width

The measurement of the threaded neck of a T-slot bolt from side to side. Throat width is an important measurement in determining the dimensions of a T-slot.

title block

The area of a blueprint containing information such as company name, part name, part number, designer, scale, and material. Title blocks are unique to each manufacturer.

tolerances

An acceptable variation or deviation from a given dimension or geometry. Tolerances indicate the allowable difference between a physical feature and its intended design.

T-slot nut

A specially-shaped fastener typically used with a threaded clamp to secure a position. T-slot nuts enable engineers to place fixture components anywhere along the component where the T-slot runs.

two-dimensional

2D. Having a length and width, but not depth. Flat shapes are two-dimensional.

typical dimensions

A dimension that is assumed to be the same for similar features of a part. Typical dimensions are followed by an X or the word PLACES.

views

All the lines that illustrate the shape of the part. A blueprint often contains multiple views to convey all of a part's design elements.

windings

Wire wrapped around a core or into a coil that is used to conduct current. Windings form electromagnets and magnetic fields in motors and other devices.

workholding

A method or device for securing a workpiece for a machining operation. Workholding can include chucks, vises, and bolts.